The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Dashboard App Functionality
03-27-18, 02:08 AM (This post was last modified: 03-28-18 01:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Dashboard App Functionality
My current understanding of the Dashboard App in Lighthouse 3.4 finds the Dashboard App seems to be severely limited compared to the "Data Panel" in the old E-120 classic display. Specifically I would like to have:

1) The ability to subdivide the Dashboard into as many pieces as possible. It appears the center section is reserved for some graphical display (Sailing=Very limited utility to Power Boater; Navigation; Engine=Very limited utility if do not have Electronic controls; Boat=Very limited utility without electronic tank and battery monitors)

2) As an owner of a power boat with mechanical engines, the only Dashboard with utility is the Navigation Dashboard; However, I cannot find how to add the following:
i) Graphical Trim Tab Position as shown in the "Engine" Dashboard
ii) Ground Wind and Apparent Wind Velocity
iii) Add more data boxes to the display. It seems there are only about 6-8 user defined data boxes. On the old system I could define many more than that.

Thanks.

Jon Spain
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Dashboard App Functionality - jkspain - 03-27-18 02:08 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)