The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] Auto tack or auto turn

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Auto tack or auto turn
04-08-18, 12:29 PM (This post was last modified: 04-09-18 03:16 PM by Chuck - Raymarine - Moderator.)
Post: #1
peter warm Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2018
Reputation: 0
[CA] Auto tack or auto turn
I have a new ev1,P70 and tiller pilot, just connected to existing e57 and St60+ set.

The pilot seems ok, but when in auto mode and press together 10 and 1 keys to tack, the pilot aims for 90 degrees. This boat is a catamaran and I want to change this to 100 or even 110 to make sure she makes the tack. I can trim afterwards.

Note this is not in wind mode.

any help greatfully received.

peter
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Auto tack or auto turn - peter warm - 04-08-18 12:29 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication