Raymarine forum / Raymarine Forums / Autopilots v / [CA] EV100: including i50 speed correctly?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] EV100: including i50 speed correctly?
04-09-18, 03:40 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] EV100: including i50 speed correctly?
Welcome to the Raymarine Forum Bass,

If developing a system which will be best prepared for future expansion, it is recommended that each device having a SeaTalkng / NMEA 2000 communications interface be interfaced as an individual spur, rather than be daisy chained. Accordingly, it would be recommended that the T-Piece shown within the diagram be replaced with a 5-Way Connector. In sailing vessels, where equipment will be installed within a binnacle pod(s) the recommendations found here would apply.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] EV100: including i50 speed correctly? - Chuck - Raymarine - Moderator - 04-09-18 03:40 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication