[CA] DSC Support in Lighthouse 3.4

[TKP62]

Helping a friend interface his Axiom9 with NMEA0183 and we are having this issue. He has the latest LH3.6 as of this date. Installed an Actisense converter into the NG backbone via a Devicenet cable. VHF is a Horizon GX2000. L/L is being received by the VHF but when a position report request is received by the VHF, it's not being displayed on the Axiom9.

Personally, I have an e125 with the same radio connected by NMEA0183 and when I receive a DSC position report on the VHF a dialog box pops up on my e125 and asks if I want to "Place a Waypoint". Is the Axiom9 with the latest software unable to do this?
The 3.6xx manual says PGN129808 is supported.

Thanks