The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [DG] Realvision 3D sloping bottom problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] Realvision 3D sloping bottom problem
04-25-18, 09:34 AM (This post was last modified: 04-26-18 03:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
stevescottuk Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2018
Reputation: 0
[DG] Realvision 3D sloping bottom problem
I have an Axiom 12 pro RVX connected to RV-212S and RV-212P (12deg) plus some other Raymarine kit recently fitted to a Botnia Targa 31.

The problem I have is that the bottom on Realvison 3D is not displayed as an constant depth but rather as a slope even when I know it to be flat.

Other than that the Realvison 3D seems to be working ok.

Is there some adjustment I need to do?

See attached screenshots of examples of the problem.


http://forum.raymarine.com/attachment.php?aid=1814

http://forum.raymarine.com/attachment.php?aid=1815

Best regards

Steve
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] Realvision 3D sloping bottom problem - stevescottuk - 04-25-18 09:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication