The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AIS 250 Install
05-06-18, 05:53 PM (This post was last modified: 05-08-18 08:30 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] AIS 250 Install
Good Evening,

I have aC120 Classic MFD installed on my boat with some newer devices networked to it. I have an EV-100 A/P and a Yamaha Gateway Command Link N2K interfaced to the C120. As it sits right now all electronics and devices work well. I just came across a Raymarine AIS 250 and I would like to add this to the menagerie. I have the Yamaha Gateway connected via a Raymarine A06045 Cable. Is it possible to jump in on this connection from the Gateway going to the network or is there a better method to make the connection to the MFD?

FROM THE AIS 250 Installation Guide:

Both 38.4 kbaud IN/OUT ports are connected to the single
NMEA 0183 port on either a C or E-series multifunctional display
with the connected NMEA port configured to 38400.

I believe the NMEA Port on my MFD is being occupied by the Yamaha Gateway, unfortunately I am a few days away from my boat and documentation to verify exactly how it is configured. I am just trying to get a head start on this before I install.

Thanks for any and all help
Regards
Chris
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] AIS 250 Install - solomon - 05-06-18 05:53 PM
RE: [CA] AIS 250 Install - solomon - 05-09-18, 06:46 PM
RE: [CA] AIS 250 Install - solomon - 05-14-18, 01:47 PM
RE: [CA] AIS 250 Install - solomon - 05-18-18, 07:31 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)