Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Behavior of networked LH3 MFDs
05-10-18, 10:26 AM (This post was last modified: 05-10-18 10:26 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Behavior of networked LH3 MFDs
Welcome to the Raymarine Forum JPA,

Q1. Is it correct for changes to one MFD's homescreen/app pages to be mirrored on other displays in the network?
A1. Yes

Q2. Is it correct that, when the same app is running simultaneously on multiple networked MFDs, changes made on one MFD are mirrored on the others?
A2. Yes

Q3. If the above are incorrect, should I reset both MFDs and if so, would I need to perform a Factory Reset or would a System Reset be likely to correct the issue without loosing my custom app pages, data overlays, etc?
A3. The recommendation to perform the Factory Reset was initiated prior to gaining knowledge that Wstandis had been using the same Fishfinder icon from the home screen of both MFDs to launch the Fishfinder app page which was being viewed. Accordingly, not Factory Reset would be required to correct the problem which Wstandis had reported with the Fishfinder app ... Wstandis simply had to select another instance of the Fishfinder app to run on the second MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Behavior of networked LH3 MFDs - Chuck - Raymarine - Moderator - 05-10-18 10:26 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)