Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Interfacing a Fusion AV750 to Lighthouse 3

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Interfacing a Fusion AV750 to Lighthouse 3
05-23-18, 03:00 AM (This post was last modified: 05-23-18 07:59 AM by Chuck - Raymarine - Moderator.)
Post: #5
PByacht Offline
Junior Member
**
 		Posts: 7
Joined: May 2018
Reputation: 0
RE: [CA] Interfacing a Fusion AV750 to Lighthouse 3
Hi again,

Could I run a connection option by you please? My plan A avoids building a new 5 way, by using an existing T connector with a terminated blue that is free. Or must it be a connected by a powered 5 way? I've attached a sketch.

Plan A
Fusion AV750 'Wired Remote NMEA 2000' Male DeviceNet plug >
Adaptor cable A06045 0.4m SeaTalkng cable >
New T connector with one Blue terminated>
10m blue backbone cable >
Existing T connector's spare blue that connects an Axiom 7 to rest of network.

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Interfacing a Fusion AV750 to Lighthouse 3 - PByacht - 05-23-18 03:00 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication