The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / NMEA 183 Interface

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA 183 Interface
04-08-16, 10:18 AM
Post: #1
ledouxjj Offline
Junior Member
**
 		Posts: 8
Joined: Mar 2016
Reputation: 0
NMEA 183 Interface
I am moving the thread from the previous thread concerning powering a NMEA 2000.

As Chuck suggested I tried connecting the NMEA Port 1 input and output of my eS127 together and then viewed the buffer. I am seeing both the input and output in the buffer and have discovered that when the plotter translates the GPS data to the 183 port it also include it's talker ID of $EC to the front of the sentence.

Can the eS127 be programed or changed to not include its Talker ID for any data that it doesn't originally produce?

It is going to cost me an additional $400 and labor to make this work around.

John
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
NMEA 183 Interface - ledouxjj - 04-08-16 10:18 AM
RE: NMEA 183 Interface - ledouxjj - 04-09-16, 09:32 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication