Raymarine forum / Raymarine Forums / Autopilots v / [CA11] EV-1/ACU 200/P70R - worked fine last season, now won't hold heading

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] EV-1/ACU 200/P70R - worked fine last season, now won't hold heading
05-29-18, 03:31 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] EV-1/ACU 200/P70R - worked fine last season, now won't hold heading
Welcome to the Raymarine Forum esveden,

The most common cause for such performance issues is a malfunctioning or poorly calibrated speed through water sensor (paddle wheel) within the system's instrument or fishfinder transducer(s). This issue may be immediately corrected by selecting SOG instead of AUTO or Speed for the autopilot Speed Input configuration setting (MENU->SET-UP->AUTOPILOT CALIBRATION->VESSEL SETTINGS->SPEED INPUT) until such time as the speed through water sensor issue has been addressed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] EV-1/ACU 200/P70R - worked fine last season, now won't hold heading - Chuck - Raymarine - Moderator - 05-29-18 03:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication