Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] Multiple Axioms Connections
06-19-18, 05:34 AM
Post: #2
RE: [DG] Multiple Axioms Connections
Hi carlmk

Thankyou for your enquiry.

The two AXIOM will need to be connected via RayNet, so you will have to change the SThs cable. The cable and the connectors are different.

Simply connect the AIS NMEA0183 to the lower station AXIOM and RayNet will carry all the AIS Data to the cockpit mounted unit.

SeaTalk and SeaTalk ng are two completely different protocols and cables, STng having 5 cores and SeaTalk 3. The converter is only used to convert data from existing SeaTalk products to STng, once it is in the STng format, and connected to an AXIOM, the SThs will then share the converted SeaTalk data between the AXIOM dsisplays.

Additional information can be found here .

Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [DG] Multiple Axioms Connections - Derek - Raymarine - Moderator - 06-19-18 05:34 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)