The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Standard Horizon GX1600 DSC Connection
06-20-18, 09:02 AM (This post was last modified: 06-21-18 02:47 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Standard Horizon GX1600 DSC Connection
I want to connect my GX1600 to my Axiom 9 to enable DSC communications between the MFD and the radio. The GX1600 outputs NMEA 0183 and I have a SeaTalkng Network on my boat. (Just the Raymarine SeaTalkng Starter Kit)
I have been told several different solutions when I call the Raymarine Support line. After doing some research it appears that the Raymarine VHF 0183 to SeaTalkng Converter Kit would be the best option. The radio has the NMEA I/O cable ending in 4 leads which I believe would connect to the 4 lead yellow cable coming from the yellow port on the converter. Would this setup enable both the radio and the Axiom 9 to show boat positions on the chart and also show the position coordinates on the radio?

Thanks for your help.

Sal Guttilla
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Standard Horizon GX1600 DSC Connection - S Guttilla - 06-20-18 09:02 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)