European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Multifunction Displays 
/
[CA] [CA11] Need to know the proper seatalk interface between C80 and E80
/
[CA] [CA11] Need to know the proper seatalk interface between C80 and E80
|
[CA] [CA11] Need to know the proper seatalk interface between C80 and E80
|
|
07-05-18, 03:46 PM
Post: #2
|
|||
|
|||
|
RE: [CA11] Need to know the proper seatalk interface between C80 and E80
Welcome to the Raymarine Forum Andy,
The 6-pin cable which you have referred to is the E-Series Classic MFD's SeaTalk/Alarm Cable. As its name suggests, this cable is not only designed to permit the MFD to be interfaced to the SeaTalk bus, but to also be used with an optional external alarm. To connect the E-Series Classic MFD's SeaTalk/Alarm Cable to the SeaTalk: - splice the E-Series Classic MFD's SeaTalk/Alarm Cable SeaTalk data (yellow) lead to the currently installed SeaTalk Cable's data (yellow) lead - splice the E-Series Classic MFD's SeaTalk/Alarm Cable SeaTalk ground (black) lead to the currently installed SeaTalk Cable's data (shield) lead - Insulate the E-Series Classic MFD's SeaTalk/Alarm Cable SeaTalk power (red) lead, as it will not be used - Insulate the currently installed SeaTalk Cable's power (red) lead, as it will not be used |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA11] Need to know the proper seatalk interface between C80 and E80 - andyschoenb - 07-05-18, 03:02 PM
RE: [CA11] Need to know the proper seatalk interface between C80 and E80 - Chuck - Raymarine - Moderator - 07-05-18 03:46 PM
|
User(s) browsing this thread: 1 Guest(s)