Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] GPM400 to Axiom Pro upgrade/retrofit

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] GPM400 to Axiom Pro upgrade/retrofit
07-17-18, 02:37 PM
Post: #9
anthem Offline
Junior Member
**
 		Posts: 9
Joined: Jul 2018
Reputation: 0
RE: [CA11] GPM400 to Axiom Pro upgrade/retrofit
Perfect. Diagram is exactly what I need. Its a Ram 2.25" ball (they have a smaller ball as well) and that narrows down the selections from Ram. . .

I would love to see the back of an Axion 16 XL just to see if the holes are there for the same bracket. . It would make a lot of sense to have the same bracket fit the similar sizes of the two MFD;s. . although I know the 16 XL is about an inch narrower than the Pro.. .
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] GPM400 to Axiom Pro upgrade/retrofit - anthem - 07-17-18 02:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication