The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Transducer (cp100) mounting location on Pontoon Boat

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Transducer (cp100) mounting location on Pontoon Boat
07-19-18, 07:00 PM (This post was last modified: 07-25-18 12:40 PM by Chuck - Raymarine - Moderator.)
Post: #1
Tonyn Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2018
Reputation: 0
[CA11] Transducer (cp100) mounting location on Pontoon Boat
The installation instructions for the CP100 transducer for the A78 MFD says for clockwise prop rotation mount the transducer on the starboard side.
I have a pontoon boat and my old transducer is mounted on the the port side which is where the mounting extension on the pontoon is located.
Is the starboard location correct and absolute or can I mount it on the port side.
Thank,.
Tony
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Transducer (cp100) mounting location on Pontoon Boat - Tonyn - 07-19-18 07:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication