Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom/Pro seawater temp source.
09-02-18, 07:37 AM (This post was last modified: 09-05-18 12:57 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Axiom/Pro seawater temp source.
Thanks for that. I found a labelled temp sensor hanging from the loom under the engine controls, so simply unplugged it. As the boat is not in the water, the OAT and transducer temps would obviously be much the same, but I have lost the message saying that this is not the temp source when looking at the B-175M, whereas the RV 100 still has that message , so I could assume I now have the B175M as water temp source. I intend to confirm this by checking temp then gently applying a heat gun from a distance to see if the temp goes up a bit.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom/Pro seawater temp source. - ranmar850 - 09-02-18 07:37 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)