Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RS 150 to e120 issue
07-30-18, 12:24 PM
Post: #2
RE: [CA11] RS 150 to e120 issue
Welcome to the Raymarine Forum CBK,

It appears that you have incorrectly interfaced the Raystar 150 GPS Sensor to the MFD. The MFD should be disconnected from the SeaTalk bus. The MFD and Raystar 150 GPS Sensor should each be interfaced as spurs to a powered and properly terminated SeaTalkng / NMEA 2000 backbone which includes a SeaTalk to SeaTalkng Converter (which has been updated with the latest ST-STng Converter software). The unpowered SeaTalk bus would then be interfaced to the SeaTalk socket of the SeaTalk to SeaTalkng Converter. The SeaTalk bus will be powered by the SeaTalkng backbone via the SeaTalk socket of the SeaTalk to SeaTalkng Converter.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] RS 150 to e120 issue - CBK - 07-29-18, 01:15 AM
RE: [CA11] RS 150 to e120 issue - Chuck - Raymarine - Moderator - 07-30-18 12:24 PM
RE: [CA11] RS 150 to e120 issue - CBK - 07-31-18, 01:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)