Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Rmk10
08-02-18, 11:48 AM (This post was last modified: 08-02-18 02:44 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Rmk10
Welcome to the Raymarine Forum Bonnaud,

Q. Hello everyone, I have an axiom 9 rv with a keyboard rmk10, the keyboard is difficult to use because the sliders and zoom are much too fast, is there a sensitivity setting or speed? Thank you for your answers

A. Should slow incremental clicks the rotary knob of a RMK-9/10's UniController result in large increases or decrease in range settings and/or not provide proportional movement through the MFD's menu, then these symptoms would be indicative of a failure of the RMK-9/10 necessitating that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced.

Bienvenue au Raymarine Forum Bonnaud,
Si les clics progressifs ralentissent le bouton rotatif du UniController d'un RMK-9/10, augmentez ou diminuez les réglages de gamme et / ou ne déplacez pas proportionnellement le menu du MFD, ces symptômes indiqueraient une défaillance du RMK-9. / 10 Nécessitant qu'il soit envoyé à [] Centre de réparation de produits Raymarine [/ url] pour être vérifié / réparé.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] Rmk10 - Bonnaud - 08-01-18, 02:19 AM
RE: [CA11] Rmk10 - Chuck - Raymarine - Moderator - 08-02-18 11:48 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)