MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] c95 to existing ST1 daisy chain

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] c95 to existing ST1 daisy chain
08-29-18, 10:39 AM (This post was last modified: 08-29-18 01:37 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] c95 to existing ST1 daisy chain
I have a loop of existing ST1 chain entering and exiting my pedestal connecting an ST80 Masterview and ST80 AP keypad... I thought that connecting a c95 was going be a simple plug and play with a conversion cable and something like as ST1 junction plock to spur off for the MFD... (previous MFD not network connected?)

Apparently that's not the case??? I need to depower the ST1 chain, and power a converter E22158??? Do I need to restore the chain at the pedestal somehow?

I don't mind another method be it 0183/2000/etc... I just need the MFD to display tridata, and control an AP waypoint...

Thank You!
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] c95 to existing ST1 daisy chain - HappySailor - 08-29-18 10:39 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)