Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG] AP Type 100/300

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] AP Type 100/300
09-10-18, 08:21 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG] AP Type 100/300
Dear Ray

Thank you for your enquiry.

The T100/300 is now no longer supported and NO DATA suggests that either the compass is failed or the data being received through the NMEA input is crashing the computer.

If the T100/300 is completely isolated so it is a standalone autopilot, with drive, control unit and compass, and NO DATA still is displayed, then there computer or fluxgate compass has a fault check here for test details

If the computer is faulty, then you are looking at an update to the current autopilot systems, which comprise the EV1 sensor, the ACU200 (for T1 drives) or ACU400 (for T2 and T3 drives), you will also need a new rudder reference unit as well as a new control unit p70s.

regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] AP Type 100/300 - Ray Kowerchuk - 09-02-18, 12:12 PM
RE: [DG] AP Type 100/300 - Derek - Raymarine - Moderator - 09-10-18 08:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication