The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS Lost Connection (C90W C12OW C140W)
09-17-18, 06:25 PM (This post was last modified: 09-18-18 09:26 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] AIS Lost Connection (C90W C12OW C140W)
Hi All,
I have Raymarine C90W and C140W Chartplotters on my boat connected to a host of Maretron NMEA2000 devices via Seatalkng.

I recently added an ICOM M506 with AIS receiver on the N2K backbone.

With the radio / ais receiver connected I get "Connection Lost" messages on the chartplotters several times/minute.

This thread covers the problem well:

http://raymarine.ning.com/forum/topics/c...connection

If the above thread is accurate then a proprietary heartbeat signal is expected from the ICOM radio and isn't being sent. I was hoping you folks could list what the heartbeat signals are supposed to be. I'll be adding a Raspberry PI to the N2K newtwork and If I knew what the packets are supposed to look like, I can fake the signal in Linux.
Thanks!
~Brandon
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AIS Lost Connection (C90W C12OW C140W) - Stoomy - 09-17-18 06:25 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)