Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Low/High Frequency Transducer Option for Axiom DV

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Low/High Frequency Transducer Option for Axiom DV
10-17-18, 02:49 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Low/High Frequency Transducer Option for Axiom DV
Welcome to the Raymarine Forum rengnath,

Please click here to view a FAQ addressing this subject. Any of the 50kHz/200kHz transducers found here may be adapted for use with an Axiom DV MFD. That said, the maximum depth performance of these transducers has been found to be better in some conditions when mated to CP370 Fishfinder Sounder Module. If opting for the latter, it would typically be recommended that an Axiom MFD, rather than an Axiom DV MFD be selected as a means of offsetting the cost of the CP370.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Low/High Frequency Transducer Option for Axiom DV - Chuck - Raymarine - Moderator - 10-17-18 02:49 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication