The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] No downvision after update...
11-24-18, 04:30 PM (This post was last modified: 11-26-18 10:09 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] No downvision after update...
Hi all,

Just updated my Axiom 7 3D with the latest update, v3.7.70.

Just before the update I had spent a couple of hours out on the water checking out the boat. Everything worked well including the Chartplotter, radar and sonar - including downVision, side scan and 3D. After docking I did the Raymarine update v3.7.70' specifically for Axiom and networked peripherals. All of the networked transducers and such were turned on and recognized by the Axiom.

After the update, all worked well until I tried the downvision... All I got was "a black screen of death"! The 3D , the side scan and the sonar still work like they should. When I went to the home screen to start a new downvision app and name it, it wouldn't allow me too and installed the 3D instead.

I have to assume that there was a problem in the updating process, but I haven't found any information on how to do a reinstall of the same software or a downgrade to the last software. I'd really be appreciative of someone pointing me in the right direction.

Oh, the transducer is an RV100...

Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] No downvision after update... - Tie1on - 11-24-18 04:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)