[LW] [LW11] interconnection of new AXIOM to existing SPX 10 autopilot

[estrace]

Thanks Louise, I will wire everything like you said

Regards

Serge

(12-10-18 09:30 AM)Louise - Raymarine - Moderator Wrote:  Dear estrace,

Thank you for your query.

The best solution is to use the Seatalk to SeatalkNG Converter 5-way block to convert all Seatalk devices to STNG. (E22158)

The SPX10 although has Seatalk and SeatalkNG connections it does not bridge and convert data like the Converter block.

My recommendation would be to set up a SeatalkNG Terminated Backbone including the Seatalk to STNG Converter, spur off the Axiom, AIS700 and SPX10. Connect all the other Seatalk products, ST60+ including the ST6002 on Seatalk and connect to the yellow connector of the Converter.

All data will flow correctly in this configuration.

Many Thanks
Louise