[CA] [CA11] Ais connection via raymarine autohelm st 7000

[toniocask]

Hallo to everybody,
I need help for a friend of mine that have a old autopilot Raymarine autohelm St 700 and a radio ocean R0 6800 ais.

The problem is: The nmea 0183 is connected from the radio to the mdf plotter Raymarine C80 and the ais radio doesnt show's the position on the radio. On the plotter all is working right, speed, position etc.

We will try to connect the radio ais directly to the autohelm st 7000, but in wich port? We have on the autopilot aux 1, aux 2, aux 3 and aux 4 and bus 1 and 2. We will connect the ais directly to the autopilot because the nmea
0183 GPS speed is different of the ais speed at 3800 baund.
On my sailboat with the raymarine s2 smart pilot I have connected the ais GPS cable + and - direct to the nmea port's of my smartpilot and everything works.
It is possible to do also with this old raymarine st 7000?
Thank you.
Ciao