Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Analog to NEMA2000 converter
01-14-19, 05:39 PM
Post: #2
RE: [CA11] Analog to NEMA2000 converter
Welcome to the Raymarine Forum sr330da,

With regard to compatibility with Raymarine MFDs, all which one need consider is whether the engine system gateway(s) is NMEA 2000 certified. Like all analog to NMEA 2000 engine gateways, the Noland RS11 is designed to be calibrated and configured by its owner. Such calibration typically requires that a PC be interfaced to the engine gateway or backbone to accomplish such. Raymarine MFDs are not designed to calibrate third party NMEA 2000 devices and will simply repeat the data which they receive. With regard to configuration, all that one typically need be concerned with is proper instancing of the NMEA 2000 PGNs transmitted by the engine gateway.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Analog to NEMA2000 converter - Chuck - Raymarine - Moderator - 01-14-19 05:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)