The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST70/Smart Pilot x30

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST70/Smart Pilot x30
01-14-19, 10:14 AM (This post was last modified: 01-14-19 05:46 PM by Chuck - Raymarine - Moderator.)
Post: #1
dapagani Offline
Junior Member
**
 		Posts: 3
Joined: Feb 2018
Reputation: 0
[CA11] ST70/Smart Pilot x30
I am upgrading my 2011 system, currently have E120W, DSM300, GPS125, Radar 4 KW E52069E, Seatalk HS, Seatalk ng converter, ST70/SPX30 Autopilot. the gps antenna was connected to the sea talk ng converter, now removed, open connection.
I have removed everything except the auto pilot spx30 and st70 controller, seatalk ng converter, I want to use the auto pilot stand alone, unfortunately not supported by Garmin mfd or NMEA 2000.
the st70 is connected to the sea talk ng converter (sea talk cable that was connected to E120W disconnected), the SPX30 also connected to sea talk ng, and the sea talk ng converter still is powered and all sensor connections unchanged. Upon power up of st 70, receive message "No Pilot". any help is appreciated.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ST70/Smart Pilot x30 - dapagani - 01-14-19 10:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication