[CA] [CA11] Sea Talk failure
|
02-18-19, 11:29 AM
(This post was last modified: 02-19-19 09:21 AM by Chuck - Raymarine - Moderator.)
Post: #6
|
|||
|
|||
RE: [CA11] Sea Talk failure
So, I got tbe course computer installed and still get SeaTalk Failure. I unplug the tridata from tbe system, and the st6002 comes alive in standby mode, but will not engage. I switched the cables around and with the tridata out of the loop (and obviously off) the autopilot works with just the wind instrument connected.
The only other thing that I see is the speed read out on the tridata that comes from the gps, is blank. I don’t have any spare SeaTalk cables and I am in Bimini, so I really can’t try that.. Any other ideas on what to try? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Sea Talk failure - 88driver - 02-06-19, 01:37 PM
RE: [CA11] Sea Talk failure - Chuck - Raymarine - Moderator - 02-06-19, 01:56 PM
RE: [CA11] Sea Talk failure - 88driver - 02-06-19, 02:17 PM
RE: [CA11] Sea Talk failure - Chuck - Raymarine - Moderator - 02-06-19, 03:14 PM
RE: [CA11] Sea Talk failure - 88driver - 02-06-19, 03:22 PM
RE: [CA11] Sea Talk failure - Chuck - Raymarine - Moderator - 02-19-19, 11:37 AM
|
User(s) browsing this thread: 1 Guest(s)