Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] replacing C80 with two E80's Seatalk connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] replacing C80 with two E80's Seatalk connection
02-13-19, 08:52 AM (This post was last modified: 02-13-19 11:19 AM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] replacing C80 with two E80's Seatalk connection
andyschoenb,

Diagrams as well as other information associated with E-Series Classic MFDs may be found within the E-Series Networked Display Installation Manual. Of particular interest would be the typical two node system incorporating two displays diagram within Chapter 2.4 Integrating an E-Series display of this manual. The E55058 is the SeaTalkhs Network Switch which I had referenced within my initial response and detailed within the E-Series Networked Display Installation Manual.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] replacing C80 with two E80's Seatalk connection - Chuck - Raymarine - Moderator - 02-13-19 08:52 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication