Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] replacing C80 with two E80's Seatalk connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] replacing C80 with two E80's Seatalk connection
02-13-19, 11:12 AM (This post was last modified: 02-13-19 11:28 AM by Chuck - Raymarine - Moderator.)
Post: #5
andyschoenb Offline
Junior Member
**
 		Posts: 14
Joined: Apr 2018
Reputation: 0
RE: [CA11] replacing C80 with two E80's Seatalk connection
Thank you Chuck that is very helpful.
I have a related question to connecting the C80 seatalk wire to the replacement E80. Since the C80 wire is a 3 prong and the E80 is a 6 prong plug, do I just connect the corresponding 3 wires, and if I do this, can you please explain what functions I will loose not connecting the remaining 3 wires from the E80 plug?
Thank you
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] replacing C80 with two E80's Seatalk connection - andyschoenb - 02-13-19 11:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication