MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] C80 and 2kw radar


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] C80 and 2kw radar
02-14-19, 05:41 PM (This post was last modified: 02-15-19 09:57 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] C80 and 2kw radar
I am trying to get a C80 classic chart plotter (original with boat) and a raymarine 2 kw radome scanner talking to each other and I’m having some difficulties. When I boot up the c80 with the scanner attached I get no alerts and when I push tx the radar symbol in the upper right corner spins but I see nothing happening on the screen.
C80 firmware is 4.26

2kw scanner firmware is 20.25

I currently have limited internet and cannot post pictures of the self test but here are the results:
Serial number 1260099-00000
Heater count 2575
Scanner reset count 0
Magnetron current 132
Rotation time 2574ms
Display come Pass
Cable Test Pass
Shp sensor Pass
Mag heater Pass
Eeprom write Pass
Factory setup 140
Etc preset max Pass
Video test 5577273
IF serial number 5580838
MOD serial AFEB A-600A
Unit serial 1260099
Mod Ict test Pass
MOD core test Pass
IF Itc test Pass
IF fate test Pass
IF core test Pass
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] C80 and 2kw radar - guill309 - 02-14-19 05:41 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)