Autohelm ST50 Wind Instrument
|
05-11-16, 12:18 AM
Post: #3
|
|||
|
|||
RE: Autohelm ST50 Wind Instrument
(05-06-16 03:03 PM)LngTmSlr Wrote: I've set up an STng circuit to tie together an e7 MFD, P70/ACU100/eV1/ST4000+ Autohelm, and AIS650. Using an ST to STng converter, I've connected an i40 Bidata speed and depth instrument and an old Autohelm ST50 Wind instrument. I've updated software and done initial startup of the e7 MFD and Autohelm system. Everything seems to be running well except the i40 and ST50 wind instrument won't turn on (blank screens). I have verified the ST to STng converter is supplying 12V to the ST50 at the right hand ST connector (when looking at the back of the instrument). The i40 Bidata Speed/Depth instrument is connected to the left hand ST connector on the back of the ST50 instrument. Voltage coming out of the ST50 at the left hand ST connector is 4.27 VDC, probably not enough to engergize the i40 unit. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Autohelm ST50 Wind Instrument - LngTmSlr - 05-06-16, 03:03 PM
RE: Autohelm ST50 Wind Instrument - Steve - Raymarine - Moderator - 05-09-16, 10:34 AM
RE: Autohelm ST50 Wind Instrument - LngTmSlr - 05-11-16, 12:23 AM
RE: Autohelm ST50 Wind Instrument - LngTmSlr - 05-11-16 12:18 AM
RE: Autohelm ST50 Wind Instrument - Steve - Raymarine - Moderator - 05-12-16, 02:49 PM
|
User(s) browsing this thread: 1 Guest(s)