Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] Q24c - need to track a target in order to get the vessel speed and bearings?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Q24c - need to track a target in order to get the vessel speed and bearings?
04-02-19, 04:00 PM (This post was last modified: 04-02-19 04:01 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Q24c - need to track a target in order to get the vessel speed and bearings?
Welcome back to the Raymarine Forum ray18,

Q1. do i need to track a target in order to get the vessel speed and bearings?
A1. Yes.

Q2. (2) Does the target vessel have to have AIS - automatic identification system (AIS) ?
A2. Negative.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Q24c - need to track a target in order to get the vessel speed and bearings? - Chuck - Raymarine - Moderator - 04-02-19 04:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication