The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] Display Q2 Doppler Targets on Chart Overlay

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Display Q2 Doppler Targets on Chart Overlay
04-03-19, 07:25 PM (This post was last modified: 04-08-19 01:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
vacantid Offline
Junior Member
**
 		Posts: 12
Joined: Apr 2017
Reputation: 0
[CA11] Display Q2 Doppler Targets on Chart Overlay
I have a new Q2 radar and Axiom MFDs (9 and 12") installed. The radar is connected via Ethernet cable to the displays (via HS switch).

While I can view Doppler targets on the Standalone Radar Application and I can see standard (fixed) target detections in Red / Purple / Black colors when overlaid on the chart application, I cannot see Red / Green Doppler targets when the radar data is overlaid on a chart application. I am using the latest software updates.

Is there a compatibility issue here or is there a setting I have missed somewhere that will allow display of Doppler targets in Red and Green specifically? Do I need to select "Black" radar data to see the Red / Green Doppler detections? Other settings?

Thanks for the help - greatly appreciated.
Dave V
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Display Q2 Doppler Targets on Chart Overlay - vacantid - 04-03-19 07:25 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication