The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Is the Airmar T80 temperature transducer compatible with the ICT5?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Is the Airmar T80 temperature transducer compatible with the ICT5?
04-07-19, 01:19 PM (This post was last modified: 04-09-19 11:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
mystery Offline
Junior Member
**
 		Posts: 7
Joined: Nov 2017
Reputation: 0
[CA11] Is the Airmar T80 temperature transducer compatible with the ICT5?
Hello,

Is the Airmar T80 temperature transducer compatible with the ICT5?

http://airmar.com/productdescription.html?id=137

I know the ST69 is but apparently the speed paddle wheel will not work on my boat due to large inboards causing too much disturbance and I do not want to cut a [censored] for a thru-hull speed/temp transducer at this time.

It looks like the T80 has three wires whereas the ST69 has five. I see the five connections on the diagram for the ICT5. If it would be compatible, which three do I wire into and which two would be left blank? Also, how does it get wired into the ICT5? Does there need to be some sort of connector or I just feed the bare wire end in somehow?

Thank you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Is the Airmar T80 temperature transducer compatible with the ICT5? - mystery - 04-07-19 01:19 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication