[CA] [CA11] DST800 to iTC-5

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum jmur2808,

Should each of the DST800's lead be interfaced to the iTC-5, the transducer's paddlewheel be spun through several quick revolutions, and the Speed/Temp LED of the iTC-5 continue to blink, then it would appear that the iTC-5 or the DST800 has suffered a failure. Please click here to view a FAQ addressing how to test the speed transducer. Should no fault be found with the speed transducer, then the iTC-5 should be sent to Raymarine’s Product Repair Center to be bench checked / serviced.

Most Raymarine products, including the iTC-5, carry a 2-year warranty from the date of purchase (product or boat) which may be extended to a 3-year warranty if the product is registered within 30 days or installed by a Certified Raymarine Installer or OEM boat builder. If seeking information concerning the warranty status of your product, then it would be recommended that Raymarine's warranty team be contacted by e-mail (warranty@raymarine.com).