[LW] [LW11] Converting issues changing from C120 to AxiomPro 9
|
04-26-19, 09:26 AM
Post: #2
|
|||
|
|||
RE: [LW11] Converting issues changing from C120 to AxiomPro 9
Dear ALK310,
Many thanks for your post. The software update and instructions for the ST70 can be found here. You cannot update the ST70 via the Axiom. The SPX range is not compatible with the Axiom so you will not have autopilot control, you can still track but will need to action this from the autopilot control head. How have you connected the AIS unit to the Axiom? Have you used the NMEA out on the AIS unit to the NMEA in on the Axiom Pro? Is the AIS unit powered on? Many Thanks Louise |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[LW11] Converting issues changing from C120 to AxiomPro 9 - AKL310 - 04-24-19, 01:58 PM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - Louise - Raymarine - Moderator - 04-26-19 09:26 AM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - AKL310 - 04-27-19, 02:52 PM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - Louise - Raymarine - Moderator - 04-30-19, 09:10 AM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - AKL310 - 05-02-19, 03:11 AM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - Louise - Raymarine - Moderator - 05-02-19, 08:01 AM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - AKL310 - 05-02-19, 02:04 PM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - Louise - Raymarine - Moderator - 05-03-19, 09:46 AM
|
User(s) browsing this thread: 1 Guest(s)