[TG] S100 remote controller: arrows do no change course
|
05-12-19, 09:18 PM
(This post was last modified: 05-12-19 09:24 PM by Tom - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: S100 remote controller
Hello SOTAR,
This is a common question with S100s. The S100 was designed originally for use with our now-retired S1000 fishing autopilot and comes factory configured for use with the S1000. In that mode it won't work fully with other standard autopilots. To solve the problem, you need to change the vessel type to either Sail or Power (not Fishing), as described on p20 of the S100's owners' manual (which you can download from http://www.raymarine.com/manuals-documents/ if you don't have a copy. Copying/pasting from that handbook, the process is:
Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
S100 remote controller: arrows do no change course - SOTAR - 05-09-19, 02:51 AM
RE: S100 remote controller - Tom - Raymarine - Moderator - 05-12-19 09:18 PM
|
User(s) browsing this thread: 1 Guest(s)