[DG11] Es127 interfaced with st5000 autopilot

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] Es127 interfaced with st5000 autopilot

05-10-19, 06:41 AM

Post: #4

Derek - Raymarine - Moderator Offline

Administrator

Posts: 1,416
Joined: Nov 2017
Reputation: 9

RE: [DG11] Es127 interfaced with st5000 autopilot

Hi Hannibal,
Thank for the feedback.

This would sound then like a data loop issue. Check your network and look for parallel data paths, for example , both NMEA0183 and SeaTalk connected between the two units, possibly there is a third party product connected as well that is receiving and transmitting NMEA 0183 in the system. Possibly there is a parallel between STng and NMEA0183?

If you are unsure, please draw out a full system diagram of all related equipment, how it is connected and we can try to identify the likely cause.

Regards

Derek

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] Es127 interfaced with st5000 autopilot - Hannibal - 05-09-19, 04:08 AM

RE: [DG11] Es127 interfaced with st5000 autopilot - Derek - Raymarine - Moderator - 05-09-19, 04:54 AM

RE: [DG11] Es127 interfaced with st5000 autopilot - Hannibal - 05-09-19, 04:13 PM

RE: [DG11] Es127 interfaced with st5000 autopilot - Derek - Raymarine - Moderator - 05-10-19 06:41 AM

RE: [DG11] Es127 interfaced with st5000 autopilot - Hannibal - 05-14-19, 05:59 PM

RE: [DG11] Es127 interfaced with st5000 autopilot - Derek - Raymarine - Moderator - 05-15-19, 05:27 AM

User(s) browsing this thread: 1 Guest(s)