Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] No Rudder Position Indication

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] No Rudder Position Indication
05-13-19, 03:56 PM (This post was last modified: 05-13-19 03:59 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] No Rudder Position Indication
Welcome to the Raymarine Forum Dave,

Typically Raymarine's M81105 Rudder Reference Transducer will be interfaced to the ACU's Rudder terminals by matching the colors of the transducer leads to the rudder cable connection terminals of the ACU. The autopilot will not sense the presence of a rudder reference transducer when the rudder angle exceeds 30 degrees. Accordingly, it is best to star up the system with the rudder close to amidships. The Dockside Wizard may be re-executed via the command sequence MENU->SET-UP->SETUP->AUTOPILOT CALIBRATION->COMMISSIONING->DOCKSIDE WIZARD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] No Rudder Position Indication - Chuck - Raymarine - Moderator - 05-13-19 03:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication