Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] RS 62157 Cable for A70D - source?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] RS 62157 Cable for A70D - source?
07-09-19, 12:56 AM
Post: #15
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] RS 62157 Cable for A70D - source?
Hello Akke,

I've just checked and the dimensions and pin layout are identical. If you were to take care with what you connected with what, you could use an a/c/e/eS/gS power cable with A50/A57/A70 by modifying the cable to carve a new key-way. You might use a soldering iron or craft multi-tool or similar to create this keyway. As you say, we can't support this and haven't tested it, but personally I don't see why it wouldn't work.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] RS 62157 Cable for A70D - source? - Tom - Raymarine - Moderator - 07-09-19 12:56 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication