[CA11] AIS700 cable connection to Axiom

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] AIS700 cable connection to Axiom

05-22-19, 10:06 PM (This post was last modified: 05-23-19 08:25 AM by Chuck - Raymarine - Moderator.)

Post: #5

halfwaytoo Offline

Junior Member

Posts: 8
Joined: Jun 2017
Reputation: 0

RE: [CA11] AIS700 cable connection to Axiom

There is an unused network port on the back of the Axiom MFD. Would using a Raynet to Raynet cable #A80006 work? The plan would be connect the AIS700 network port directly to the Axiom network port. Also, would this cause aproblem with the existing Axiom to Seatalk1 interface via the converter to existing legacy devices?
Thanks for your patience.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] AIS700 cable connection to Axiom - halfwaytoo - 05-20-19, 05:05 PM

RE: [CA11] AIS700 cable connection to Axiom - Chuck - Raymarine - Moderator - 05-21-19, 10:31 AM

RE: [CA11] AIS700 cable connection to Axiom - halfwaytoo - 05-21-19, 06:23 PM

RE: [CA11] AIS700 cable connection to Axiom - Chuck - Raymarine - Moderator - 05-22-19, 08:49 AM

RE: [CA11] AIS700 cable connection to Axiom - halfwaytoo - 05-22-19 10:06 PM

RE: [CA11] AIS700 cable connection to Axiom - Chuck - Raymarine - Moderator - 05-23-19, 08:32 AM

RE: [CA11] AIS700 cable connection to Axiom - halfwaytoo - 05-23-19, 09:23 PM

RE: [CA11] AIS700 cable connection to Axiom - Chuck - Raymarine - Moderator - 05-24-19, 08:25 AM

User(s) browsing this thread: 1 Guest(s)