[CA] [CA11] i60 wind giving incorrect wind data

[browerd]

I purchased a A06049 SeaTalkng Power Cable, I disconnected the i60 from the Seatalkng network and had no power to the network. I powered the i60 from the A06049 SeaTalkng Power Cable connected to a separate circuit (everything else on the boat was off) and ran it as a standalone. It still gave the same results correct for a while and then giving clearly wrong readings. I have returned the network to its original state.

As an aside I did notice the following both when run as both a stand alone and part of the network when the unit is giving "false" reading if I push (2x) the true/app button the readings appear correct for awhile and then after approximately a minute go back to the false readings