[DG] [DG11] AIS700 always heading north

[Derek - Raymarine - Moderator]

Hi Anton,

Thank you for your enquiry.

The heading of the AIS target/ Icon is derived from the COG of the GPS attached directly to the AIS700 box. You should connect a laptop with the PROAIS2 that was supplied with the AIS700 to the AIS700 and check the diagnostics, make sure all the GPS data is correct and that the COG from the direct connect GPS is correct.
If you are unsure, please forward a photograph of the screens of the laptop when PRO AIS2 is running.

Regards

Derek