Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E70364-00-NAG
06-21-19, 09:13 AM
Post: #2
RE: [CA11] E70364-00-NAG
Welcome to the Raymarine Forum Joe,

A canvas bimini top would not typically pose a problem for GPS signal reception for a MFD unless the MFD has been mounted within the helm surface. In the case of the latter, the mounting surface (or other nearby electrical components within the moun may hinder GPS signal reception by the MFD's internal GPS receiver. In such cases, it would be recommended a Raystar 150 GPS Sensor be interfaced to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. Should the system not feature a powered and properly terminated SeaTalkng / NMEA 2000 backbone, then please click here to view a FAQ addressing how a simple backbone may be constructed. The Axiom MFD will be interfaced to a spur socket within the backbone via an A06045 / 15.7in (0.4m) SeaTalkng Spur to DeviceNet (F) Adapter Cable or an A06075 / 39.4in (1.0m) SeaTalkng Spur to DeviceNet (F) Adapter Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] E70364-00-NAG - jdreid3 - 06-20-19, 07:36 AM
RE: [CA11] E70364-00-NAG - Chuck - Raymarine - Moderator - 06-21-19 09:13 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)