The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] Interfacing Ray 73 VHF AIS & eS127 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interfacing Ray 73 VHF AIS & eS127 MFD
07-13-19, 08:55 AM (This post was last modified: 07-17-19 05:07 PM by Chuck - Raymarine - Moderator.)
Post: #1
Afunnell Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2017
Reputation: 0
[CA11] Interfacing Ray 73 VHF AIS & eS127 MFD
I have interfaced my new Ray 73 VHF AIS to an existing eS127 MFD via a Seatalkng cable to a white port on a SeaTalk to SeaTalkng converter. The VHF's AIS shows up on the MFD's Set up - Maintenance - Diagnostics - Select Device listing (V70517, 1080481, STng, CAN Address: 75). On the VHF the AIS is set to On and Network output to NMEA 2000. On the MFD NMEA Setup screen Bridge NMEA Hdg is Off, NMEA Input Port 1 is set to NMEA 4800 (to accommodate other devices on the network receiving NMEA0183 data from the MFD), and NMEA Input Port 2 is set to AIS 38400. The VHF/AIS does not appear on the External Devices list and the interfaces bar at the bottom of the screen shows "No AIS". Next steps please.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Interfacing Ray 73 VHF AIS & eS127 MFD - Afunnell - 07-13-19 08:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication