[CA] [CA11] S2G and ST7001 no autolearn

[Chuck - Raymarine - Moderator]

PHINNROS,

The gyro, which should have been screwed to the circuit board of the S1/S2G/S3G and then plugged into the white socket on the left hand side of the circuit board is missing from your course computer. As indicated, in the absence of this gyro, the SmartPilot autopilot course computers will simply function as a S1/S2/S3 autopilot course computer, will not support Auto Learn, and will not output 10Hz stabilized heading data. Unfortunately, Raymarine does not publish the manufacturers/part numbers of the parts used in the manufacturing of its products.