[CA] [CA11] LH III Install issues

[nharrison5]

I have an eS127, a Ray 60 VHF, a I70S, aP70R, EV-1, ACU, Raystar 130, and a Quantum Radome and two Fox MEFI's connected to two 2006 Crusader engines, a legacy DST800 (not sure why the error message below displays a DST200), and an Airmar fish finder/depth.

I have installed LH III and updated each peripheral to your latest update. I confirmed that all have the latest update. None were issues with LH II

Several issues have cropped up since.

Issue 1

I get error messages when I attempt to manually choose speed, depth, GPS, etc sources. For instance, when I attempt to select Speed source, I get the message “Manually selecting source of Speed is not supported when the following devices are on the network.

DST200 S/N 3624425
ISO: (c3 08 67 e7 1d 96 a0 c0) CAN:(1)
Raymarine i70s DisplayS/N: 0560639
E32153 S/N: 0460097
Raymarine E070245 Ray60 VHF S/N: 0360631
please consult manual for more information."

There are several messages like this, and sometimes I can go in and change one of the peripherals that I had just gotten a message on.

Since I have two GPS's, one in the eS127 and the other, a Raystar 130, I would like to be able to assign either so I can use one as a backup if there is a problem with the other.

Thanks for any help you can give.