Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] I70s and fuel burn
07-31-19, 12:08 PM (This post was last modified: 07-31-19 04:06 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] I70s and fuel burn
Yes I am. On LH II, the I70s reported separate fuel flow rates, or at least the numbers shown in the two blocks were different for the two engines. I am getting the summed rate now, and I am ok with that. It does represent a change to what was previously reported on the I70s.

I will look at the MFD reporting to see what it shows. Unfortunately, when defining the engines as "Other" it will not allow you to define one as the "number 1 port" and the "number 2 starboard". Perhaps it is automatically picking that up from the Fox Marine data flow. I will look when I go back to the boat.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] I70s and fuel burn - nharrison5 - 07-25-19, 08:10 AM
RE: [CA11] I70s and fuel burn - nharrison5 - 07-31-19 12:08 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)