Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Stability of eS127 with v3.10.39 - Bermuda

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Stability of eS127 with v3.10.39 - Bermuda
07-30-19, 02:20 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Stability of eS127 with v3.10.39 - Bermuda
Welcome back to the Raymarine Forum Hube,

LightHouse 3 v3.10.39 software has only been in the field for a couple of weeks now. Feedback has been generally good when a Power ON Factory Reset has been performed on each MFD within the system following the software update and when the MFD's settings have been manually reconfigured rather than restored from a file. Please note that we have received reports of problems from those who have restored settings saved settings from a prior version of LH3 software. Accordingly, it is not recommended that the feature be exercised.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Stability of eS127 with v3.10.39 - Bermuda - Chuck - Raymarine - Moderator - 07-30-19 02:20 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication